-
Mullins Race Engines Billet Valley Tray Water Line Assembly Part Number: MRE-BTWLA
-
Mullins Race Engines Joe's -16 Water Line Kit Part Number: MRE-JWLK
-
USMTS SPEC HEADS:
These heads are used on USMTS/USRA sanctioned tracks. It is very limited to what work can be done to keep this head legal. We are able to take full advantage of what the rules allow with our newen valve seat machining center. We are able to optimize the flow, keep the head legal, and obtain the best valve seal. We also angle mill the heads then correction machine the intake flange so a standard manifold can be bolted on. All of this work is done in CNC machines so everything fits and matches up 100%. Matching this workmanship with the parts quality we use produces a great product!
-
WISSOTA SPEC HEADS:
These heads are used on WISSOTA sanctioned tracks. It is very limited to what work can be done to keep this head legal. We are able to take full advantage of what the rules allow with our newen valve seat machining center. We are able to optimize the flow, keep the head legal, and obtain the best valve seal. We also angle mill the heads then correction machine the intake flange so a standard manifold can be bolted on. All of this work is done in CNC machines so everything fits and matches up 100%. Matching this workmanship with the parts quality we use produces a great product!
-
MRE LS7 Heads
These Heads are used on our LS7 Engines. Both are used in Latemodel and NE MOD Type Racing. We noticed a couple things early on working with the LS Platform on circle track engines. All the available heads were to big runner wise. They were all made for drag racing or any other form of racing. The 2nd thing was the water was not correct which would cause overheating. Once we figured this out, then we knew we had to design our own head. This head turned out great, Makes awesome power, & drives good. We also got the engines running cooler. If you are building an LS Platform Oval Track Engine, I highly recommend these. It will save you a bunch of headaches.
-
Aluminum 13° MOD Heads
We designed these heads to give us an engine that drives similar to our 23° packages but simply makes more power and torque. We keep the driveability the same by keeping the cross sectional area of the head similar to our 23° Outlaw. With the head having a better port shape and many other advantages, it gives us the boost in power.
-
Aluminum 13° Latemodel Heads
This Head is used in wide variety of racing. Its a powerhouse that has great driveability. The intake runner is quite a bit bigger than our 13 MOD head, which allows it to make more peak power and to run up higher in the powerband. We use these heads in steel block and open latemodel racing as well as NE MODS on 415 to 434 Cubic Inch Engines.
-
Mullins Race Engines Water Pump Bolt Kit Part Number: MRE-WPBK
-
Mullins Race Engines MSD85551 Locked Out Distributor Assembly Bronze Gear Part Number: MRE-85551-BRONZE
-
Mullins Race Engines LS7 MSD8582 Distributor Part Number: LS7-MSD8582
-
Mullins Race Engines LS7 Horizontal Distributor Assembly Part Number: LS7-HDA
-
Mullins Race Engines Complete Ignition System Kit Part Number: MRE-CISK
-
Mullins Race Engines Willy's Fuel Log Assembly Part Number: MRE-WFLA
-
Mullins Race Engines 13 Degree Head Stud Kit Part Number: MRE-13HSK
-
Mullins Race Engines Modified Oil Cooler Line Assembly Part Number: MRE-MODOCLA
-
Mullins Race Engines 10552ST Oil Pump With 1001SB Pick Up Part Number: 10552ST-1001SB
-
Mullins Race Engines 10552ST Oil Pump With 1003SB Pick Up Part Number: 10552ST-1003SB
-
Mullins Race Engines 10555ST Oil Pump With Olson Pick Up Part Number: 10555ST-OLSON
-
Mullins Race Engines 13° Exterior Water Line Assembly Part Number: MRE-13EWLA
-
Mullins Race Engines 23 Degree Outlaw Stud Kit Part Number: MRE-23OHSK
