400 SBC Shortblock Stage 1 Rotator
Parts:
31161211 - Dart SHP Cast Iron Bare Block 9.025" Deck X 4.125" Bore, 350 Mains
MRE-400-SBC-STAGE1-ROTATOR:
SAJ-113-CM - Callies Compstar Crankshaft 3.750" Stroke X 2.100" Pins X 350 Main
CSA6000 DS2A2AH - Callies Compstar Connecting Rods 6.000" Length X 2.100" Rod Journals X .927 Wrist Pins, Set of 8
CSA6000 DS2A2AX - Callies Compstar EXTREME Connecting Rods 6.000" Length X 2.100" Rod Journals X .927 Wrist Pins, Set of 8
BC21-60071 - CP Carrillo Bullet Connecting Rods 6.000" Length X 2.100" Rod Journals X .927 Wrist Pins, Set of 8
197754525-80 - Mahle SBC 1.125" X 4.125-4.180 9cc Dome 112mm PP+ Piston Set
MS-909H - Main Bearings, H-Series, Standard, SBC, 350 Mains
CB-663HN - Connecting Rod Bearings, H-Series, Standard, Narrowed, SBC, 2.100" Rod Journals
DT-1T - Durabond Cam Bearing, Race Only, SBC, Set of 5
TLA 5020 Z - IKO 50mm Roller Bearing (50mm Cam Tunnel Option)
32540050 - Dart 50mm Cam Plug (50mm Cam Tunnel Option)
Labor:
Balance Rotating Assembly
Check and Hone to Size Pin Bores on Rods and Pistons
Clean and Polish Crankshaft
File Rings
Check and Set Rod and main Bearing Clearances
Assembly Short Block
Machine Cam Tunnel to 50mm Roller (50mm Cam Tunnel Option)
Machine Lifter Bores to .903 (.903 Lifter Bore Option)
400 SBC Shortblock Stage 2 Rotator
Parts:
31161211 - Dart SHP Cast Iron Bare Block 9.025" Deck X 4.125" Bore, 350 Mains
MRE-400-SBC-STAGE2-ROTATOR -
SAJ-14A-MG - Callies Magnum Crankshaft 3.750" Stroke X 2.000" Pins X 350 Main
BC20-60071 - CP Carrillo Bullet Connecting Rods 6.000" Length X 2.000" Rod Journals X .927 Wrist Pins, Set of 8
U16101 - Callies Ultra H-Beam Connecting Rods 6.000" Length X 2.000" Rod Journals X .927 Wrist Pins, Set of 8 (UPGRADE OPTION)
U14136 - Callies Ultra I-Beam Connecting Rods 6.000" Length X 2.000" Rod Journals X .927 Wrist Pins, Set of 8 (UPGRADE OPTION)
197754525-80 - Mahle SBC 1.125" X 4.125-4.180 9cc Dome 112mm PP+ Piston Set
MS-909H - Main Bearings, H-Series, Standard, SBC, 350 Mains
CB-745HN - Connecting Rod Bearings, H-Series, Standard, Narrowed, SBC, 2.000" Rod Journals
DT-1T - Durabond Cam Bearing, Race Only, SBC, Set of 5
TLA 5020 Z - IKO 50mm Roller Bearing (50mm Cam Tunnel Option)
32540050 - Dart 50mm Cam Plug (50mm Cam Tunnel Option)
Labor:
Balance Rotating Assembly
Check and Hone to Size Pin Bores on Rods and Pistons
Clean and Polish Crankshaft
File Rings
Check and Set Rod and main Bearing Clearances
Assembly Short Block
Machine Cam Tunnel to 50mm Roller (50mm Cam Tunnel Option)
Machine Lifter Bores to .903 (.903 Lifter Bore Option)
