Mullins Race Engines Dart USRA/IMCA Stockcar Heads

Mullins Race Engines Dart USRA/IMCA Stockcar Heads

$1,930.00

9 in stock

Mullins Race Engines Dart USRA/IMCA Stockcar Heads *FULLY MACHINED BARE CASTINGS

Mullins Race Engines Dart USRA/IMCA Stockcar Heads *FULLY MACHINED & ASSEMBLED

We use this head in multiple sanctioning bodies and in multiple classes.  We prefer the dart casting over the other options in these series allow.  We take it and apply our high quality workmanship.  This includes a valve job that flows well and is concentric for a good valve seal.  All the machined surfaces get ran across our machining centers to give you a high quality product.  These heads are mass produced and we take nothing for granite.

9 in stock

Dart USRA/IMCA Stockcar Heads

Dart USRA/IMCA Stockcar Heads *FULLY MACHINED
Parts:
91624360-Bare - IMCA Approved Bare Cast Iron SBC Cylinder Heads (Quantity: 2)
Labor:
Machine Rocker Stud Boss's Down
Machine Spring Pad and Valve Guide Boss's
Hones Guides To Proper Clearance
Newen Valve Job - Machined For 2.020/1.600 Valves
CC and Mill to Particular Chamber Size
Debur Heads After Mill
Added Labor to Machine to 64CC
Dart USRA Stockcar Heads *FULLY MACHINED & ASSEMBLED
Parts:
91624360-Bare - IMCA Approved Bare Cast Iron SBC Cylinder Heads (Quantity: 2)
F6103 - Ferrea Intake Valve 2.020 Head Diameter X 11/32 Stem Diameter X 5.010 Overall Length
F6104 - Ferrea Exhaust Valve 1.600 Head Diameter X 11/32 Stem Diameter X 5.010 Overall Length
4299MR-16 - Spring Seats Set
295D - ISKY 295D Valve Springs, Set of 16
1750-16 - Valve Spring Retainers, Tool Steel, 10 Degree, 1.250" OD, .870" ID, Set of 16
1509VL-16 - Valve Locks Set
343530 - Valve Stem Seals Set
4512-16 - Rocker Arm Studs, 7/16-20 Thread, 1.900" Effective Stud Length, Set of 16
4808-8 - Comp Cams Pushrod Guideplates
Labor:
Machine Rocker Stud Boss's Down
Machine Spring Pad and Valve Guide Boss's
Hones Guides To Proper Clearance
Newen Valve Job - Machined For 2.020/1.600 Valves
CC and Mill to Particular Chamber Size
Debur Heads After Mill
Added Labor to Machine to 64CC
Final Wash, Setup Spring Heights & Test Springs, and Race Assemble Cylinder Heads
Specs:
Intake Runner Size: 165cc
Combustion Chamber Size: 64cc
Intake Valve Head Diameter: 2.020"
Exhaust Valve Head Diameter: 1.600"
Intake Valve Seat Angle: 45 Degrees
Exhaust Valve Seat Angle: 50 Degrees
Dart IMCA Stockcar Heads *FULLY MACHINED & ASSEMBLED
Parts:
91624360-Bare - IMCA Approved Bare Cast Iron SBC Cylinder Heads (Quantity: 2)
F6103 - Ferrea Intake Valve 2.020 Head Diameter X 11/32 Stem Diameter X 5.010 Overall Length
F6104 - Ferrea Exhaust Valve 1.600 Head Diameter X 11/32 Stem Diameter X 5.010 Overall Length
4299MR-16 - Spring Seats Set
295D - ISKY 295D Valve Springs, Set of 16
1750-16 - Valve Spring Retainers, Tool Steel, 10 Degree, 1.250" OD, .870" ID, Set of 16
1509VL-16 - Valve Locks Set
343530 - Valve Stem Seals Set
4506-16 - Rocker Arm Studs, 3/8-24 Thread, 1.750" Effective Stud Length, Set of 16
4808-8 - Comp Cams Pushrod Guideplates
Labor:
Machine Rocker Stud Boss's Down
Machine Spring Pad and Valve Guide Boss's
Hones Guides To Proper Clearance
Newen Valve Job - Machined For 2.020/1.600 Valves
CC and Mill to Particular Chamber Size
Debur Heads After Mill
Added Labor to Machine to 64CC
Final Wash, Setup Spring Heights & Test Springs, and Race Assemble Cylinder Heads
Specs:
Intake Runner Size: 165cc
Combustion Chamber Size: 64cc
Intake Valve Head Diameter: 2.020"
Exhaust Valve Head Diameter: 1.600"
Intake Valve Seat Angle: 45 Degrees
Exhaust Valve Seat Angle: 50 Degrees
Total: $1,930.00
SKU: MRE-DUSRA/IMCA-FMBC Category: Tags: ,

Description

 

 

Related products

Title

Copyright 2012 - 2021 | All Rights Reserved
Facebook
Go to Top